myenergi zappi review: the solar charger, and who doesn't need one

Graham Dodd
Graham Dodd · DirectorUpdated 14 November 2026
Get your free quote
Takes 2 mins

The Short Answer

If you have solar panels, the zappi is the charger we'd pick: its ECO and ECO+ modes charge your car from spare solar, you choose how much grid top-up to allow, and there's a 22kW version for three-phase homes. It also works with Intelligent Octopus Go, and the zappi 2.1 is on OVO's Charge Anytime list. Prices start at £779 for the charger from myenergi (the 22kW and tethered versions can cost more), or £1,099 with a standard installation from OVO. PEN fault protection is built in, so no earth rod, and there's a 3-year warranty.

Without solar, you're paying a little more for features you won't use: the Hypervolt Home 3 Pro is £690 for the charger, against the zappi's £779, and the Ohme Home Pro is from £999 fitted, against OVO's £1,099. It keeps charging without the internet, but myenergi recommends keeping it online.

How the zappi's solar modes work

Move the spare-solar slider and pick a mode to see what a zappi does when you plug in: how fast it charges, and how much comes from your panels and how much from the grid.

Mode

Charging at 1.4kW: 1kW from your solar and 0.4kW from the grid (or a home battery).

ECO follows your spare solar but never drops below 1.4kW, the zappi's minimum on single-phase, so it tops up from the grid when the sun goes in.

A single-phase zappi and a car that takes 7.4kW, based on how myenergi describes the modes. myenergi says ECO+ counts down before it starts or stops a charge. A three-phase zappi needs about 4.2kW to charge on three phases.

ECO v ECO+ v FAST

zappi ECO and ECO+ on a single-phase supply: 0.5kW spare solar, ECO: 1.4kW, 0.5kW solar and 0.9kW grid; 0.5kW spare solar, ECO+: waiting for surplus; 1.4kW spare solar, ECO: 1.4kW, 1.4kW solar and 0kW grid; 1.4kW spare solar, ECO+: 1.4kW, 1.4kW solar and 0kW grid; 3kW spare solar, ECO: 3kW, 3kW solar and 0kW grid; 3kW spare solar, ECO+: 3kW, 3kW solar and 0kW grid; 6kW spare solar, ECO: 6kW, 6kW solar and 0kW grid; 6kW spare solar, ECO+: 6kW, 6kW solar and 0kW grid.From your solarFrom the grid0.5kW spare, ECO1.4kW0.5kW spare, ECO+Waiting for Surplus1.4kW spare, ECO1.4kW1.4kW spare, ECO+1.4kW3kW spare, ECO3kW3kW spare, ECO+3kW6kW spare, ECO6kW6kW spare, ECO+6kW
Below 1.4kW of spare solar, ECO charges anyway and takes the shortfall from the grid; ECO+, at its Minimum Green Level of 100%, waits. Above it, both charge on solar alone.
ModeWhat it doesUse it when
FASTCharges at full power straight away, up to 7.4kW single-phase or 22kW three-phase, or the car's limitYou need the car soon
ECOMatches spare solar, but never below 1.4kW on single-phase, so it tops up from the gridYou want the car charging all the time, as green as possible
ECO+Waits ("Waiting for Surplus") until there's enough spare solar, set by the Minimum Green Level, then charges from itThe car can wait for sunshine
STOPNo charging at all, even with a scheduled boost setYou don't want it to charge

The zappi can't charge at less than 6 amps, about 1.4kW on single-phase (4.2kW when charging on three phases). That's why ECO pulls from the grid when the sun goes in, and why ECO+ waits. In ECO+, the Minimum Green Level sets how much spare solar you need: at 100%, about 1.4kW; at 50%, about 700W, with the other 700W from the grid or a home battery. It changes the mix, not the charging speed: with more spare solar, the zappi uses it. A boost in ECO or ECO+ charges at full power while it's on.

How much of your driving solar can cover: solar EV charging.

Specs and price

myenergi zappi
Price (November 2026)From £779 for the charger (myenergi); from £1,099 with standard installation (OVO)
Power7kW single-phase or 22kW three-phase
CableType 2 tethered, or untethered (a socket for your own cable)
ConnectionThe current zappi has built-in Wi-Fi and Ethernet (older ones used a separate hub); it can charge without the internet, using its screen and buttons
ProtectionBuilt-in surge protection and PEN fault protection (no earth rod); myenergi says wiring regulations still call for a separate surge protection device, which your installer fits
In the boxA clamp sensor (CT clamp) with 5m cable, three on the three-phase model; fixings; mounting template
Warranty3 years (register the product with myenergi)
TariffsIntelligent Octopus Go; OVO Charge Anytime (zappi 2.1)

The clamp sensor measures your home's electricity flow so the zappi knows when there's spare solar. PEN fault protection guards against a rare fault in the supply's earth, which is why myenergi says no earth rod is needed. Our estimate for a standard installation of a typical 7kW smart charger is £900 to £1,300, charger included; for a zappi, OVO's from £1,099 is the installed price we've seen. OVO also sells the zappi GLO, from £949 installed.

Intelligent Octopus Go and OVO

Octopus lists the zappi among the chargers with an Intelligent Octopus Go join guide (you also need a smart meter), and OVO's Charge Anytime list includes the zappi 2.1 and the zappi GLO; if you have a different zappi, check OVO's list. That's a difference from Ohme, which isn't on OVO's list. You can also set the zappi to charge only in your tariff's cheap hours.

Common zappi "problems", explained

  • "Waiting for Surplus": it's in ECO+ and there isn't enough spare solar yet. Switch to ECO or FAST, set a boost, or lower the Minimum Green Level.
  • Only charging at 1.4kW: it's in ECO with little spare solar, so it's charging at the single-phase minimum. Use FAST or a boost to charge at full power.
  • Won't charge at all: check it isn't in STOP, which blocks charging even with a scheduled boost, and check its screen.
  • Charging slower than the zappi's rating: FAST is limited by your car's own onboard charger, or by any limit set on the zappi.
Keep it online myenergi's technical file says the zappi is designed to work without an internet connection, using its screen and buttons, but recommends keeping it connected for its smart features and firmware updates. If your Wi-Fi doesn't reach the drive, ask your installer about a network cable.

Our verdict

With solar panels, the zappi is the one we'd pick: myenergi calls it the world's first solar EV charger, and its modes let you choose between charging all the time and charging on solar alone. Without solar, it's a capable smart charger, but you'll pay a little more for features you don't need.

How it compares: the best home EV chargers and our Ohme Home Pro review.

Common questions

For solar homes, yes: the zappi can charge your car from spare solar in ECO or ECO+, and it also works with Intelligent Octopus Go, and the zappi 2.1 with OVO Charge Anytime. Without solar, a simpler smart charger does the same job for a little less.

Get a quote for a zappi

Tell us about your home and whether you have solar, and a local installer will be in touch with a free quote. No obligation.

How we checked this

Every figure and rule on this page was checked against its source on 14 November 2026. We recheck them every month.

Graham Dodd

Graham Dodd

Director · Drives a Volkswagen ID. Buzz

Graham co-founded Power EV and EV Charge Cable with the aim of removing the guesswork from home EV charging. Getting a charger fitted and choosing the right cable are closely linked decisions, and running both sites lets the team give joined-up advice on both.

Meet the team